Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model.
Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub.
Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection.
10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Multimode/ST, 2 km
Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model.
The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable.
10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Multimode/ST, 2 km
Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to 100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet devices in a choice of connector and fiber optic cable types.
Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseTX to 100BaseFX Converters 100BaseTX to 100BaseFX, Multimode/ST, 2 km
Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model.
The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable.
10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Multimode/SC, 2 km
Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to 100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet devices in a choice of connector and fiber optic cable types.
Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseTX to 100BaseFX Converters 100BaseTX to 100BaseFX, Multimode/SC, 2 km
Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model.
Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub.
Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection.
10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 15 km
Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model.
Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub.
Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection.
10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 40 km
Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model.
The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable.
10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 40 km
Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model.
The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable.
10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 15 km
Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to 100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet devices in a choice of connector and fiber optic cable types.
Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseTX to 100BaseFX Converters 100BaseTX to 100BaseFX, Singlemode/SC, 20 km
Signamax Connectivity Systems’ Switching Media Converters provide an intelligent solution for long distance connections between legacy 10BaseT networks and the newer 100Base Fast Ethernet networks. These converters are designed to handle a wide variety of fiber optic network applications and eliminate the 412 meter distance limitation when connecting hub-based sub-networks at 100BaseFX. They also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model.
Built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub.
Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Built-in switch does the network segmentation to provide the maximum fiber distance. Now with Auto-MDIX capability on the twisted-pair port for more convenient connection.
10/100BaseT/TX Switching Fiber Optic Media Converters 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 75 km
Signamax Connectivity Systems’ Switching Media Converters with Link Fault Signaling provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLDLFS model.
The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable.
10/100 Switching Converters with Link Fault Signaling 10/100BaseT/TX to 100BaseFX, Singlemode/SC, 75 km
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseFX Singlemode to Multimode Converters
100BaseFX Singlemode/SC, 15 km to Multimode/ST, 2 km
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseFX Singlemode to Multimode Converters
100BaseFX Singlemode/SC, 40 km to Multimode/ST, 2 km
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseFX Singlemode to Multimode Converters
100BaseFX Singlemode/SC, 75 km to Multimode/ST, 2 km
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseFX Singlemode to Multimode Converters
100BaseFX Singlemode/SC, 15 km to Multimode/SC, 2 km
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseFX Singlemode to Multimode Converters
100BaseFX Singlemode/SC, 40 km to Multimode/SC, 2 km
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
100BaseFX Singlemode to Multimode Converters
100BaseFX Singlemode/SC, 75 km to Multimode/SC, 2 km
Signamax Connectivity Systems’ Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to RJ-45 and either multimode or singlemode fiber optic ports on standard Ethernet devices.
Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
10BaseT to 10BaseFL Converters
10BaseT to 10BaseFL, Multimode/ST, 2 km
Signamax Connectivity Systems’ Fiber Optic Media Converters reduce cabling cost by providing flexible, non-switched fiber optic solutions for Ethernet LANs and WAN connectivity. Models are available for direct connection to RJ-45 and either multimode or singlemode fiber optic ports on standard Ethernet devices.
Each Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. They can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
10BaseT to 10BaseFL Converters
10BaseT to 10BaseFL, Singlemode/SC, 20 km
Signamax Connectivity Systems’ 065-1160 model allows interconnection between 10BaseT twisted-pair and 10Base2 coaxial Thinnet cable Ethernet networks. The 065-1160 Media Converter is enclosed in a compact, strong metal case and includes an external power supply for stand-alone applications. It can also be installed without modification in the Signamax 065-1180 and 065-1185 Rack Mount Chassis systems, featuring redundant power supplies for high reliability in multiple converter installations.
10BaseT to 10Base2 Converter
10BaseT to 10Base2, RJ-45 to BNC
Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations.
Serial Data to Fiber Converters RS-422/485 to Fiber Converter, Multimode/ST, 2 km
Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations.
Serial Data to Fiber Converters RS-422/485 to Fiber Converter, Multimode/SC, 2 km
Signamax Connectivity Systems’ Serial Data to Fiber Media Converters make it simple to extend distances over multimode or singlemode fiber. They are designed to expand the scope of your RS-232 or RS-422/485 serial data applications, and are 100% compliant with EIA RS-232 unbalanced and both RS-422 & RS-485 4-wire balanced line specifications. These converters maintain the same form factor as other Signamax media converters, allowing their use in the Model 065-1180 and the Model 065-1185 Signamax Rack Mount Chassis systems. Converters for both multimode and singlemode fiber are available in both RS-232 and RS-422/485 configurations.
Serial Data to Fiber Converters RS-422/485 to Fiber Converter, Singlemode/SC, 20 km